REMOVES WRINKLES WITH CONTINUOUS POWERFUL STEAM STAINLESS STEEL STEAM OUTLET LOCK BUTTON FOR CONTINUOUS OPERATION ANTI-STATIC NOZZLE WITH DUST REMOVAL BRUSH MEASURING CUP LIGHTWEIGHT AND COMPACT DESIGN FOR EASY STORAGE IDEAL FOR REMOVING WRINKLES FROM HANGING CLOTHES OR CURTAINS KILLS GERMS AND BACTERIA WITH HOT STEAM AND PROVIDES DISINFECTION TEMPERATURE NEAR THE STEAM NOZZLE IS 90-110 DEGREES AND IS SUITABLE FOR COTTON AND FIBER. HOWEVER, THIS TEMPERATURE IS TOO HIGH FOR WOOL, SILK AND LEATHER, SO IT IS STRONGLY RECOMMENDED TO PLACE A PIECE OF CLOTH OVER THE GARMENTS YOU ARE DE-WRINKLING OR THE MINIMUM DISTANCE FROM THE STEAM NOZZLE TO THE GARMENTS SHOULD BE 1 CM. OTHERWISE, THERE IS A HIGH PROBABILITY OF DAMAGE TO THE GARMENTS. DO NOT USE THE DEVICE ON GARMENTS YOU ARE WEARING. ---------- BEFORE FIRST USE ----------- 1. ENSURE THE DEVICE IS UNPLUGGED FROM THE MAINS POWER SUPPLY. 2. CAREFULLY REMOVE AND DETACH THE WATER TANK LID. 3. FILL THE WATER TANK WITH WATER USING A MEASURING CUP OR SIMILAR TOOL. 4. FILL THE WATER TANK WITH ROOM TEMPERATURE WATER UP TO THE DESIRED LEVEL. 5. ENSURE THE WATER TANK LID IS TIGHTLY SECURED. ---------- USAGE ---------- IT IS RECOMMENDED TO USE THE UNIT AT A TEMPERATURE OF 5-40 °C AND A RELATIVE HUMIDITY LOWER THAN 9680 BN. REMOVE THE TOP CAP OF THE WATER TANK AND FILL THE TANK WITH CLEAN WATER NOT EXCEEDING 40°C, THEN REPLACE THE CAP. PLUG THE POWER CORD INTO THE OUTLET AND TURN THE CONTROL KNOB TO THE RIGHT TO TURN ON THE UNIT, THE DEVICE LIGHT WILL ILLUMINATE AND IT WILL START TO OPERATE. THE CONTROL KNOB CAN BE USED TO CONTROL THE HUMIDITY OUTPUT. -NOTE: NEVER OPERATE THE UNIT WITHOUT WATER IN THE WATER TANK. ----------- CAUTION ---------- 1. AFTER EACH USE, ALWAYS ALLOW THE UNIT TO COOL FOR 15 MINUTES; DO NOT REFILL THE TANK WITH WATER WHILE THE BOILER IS STILL HOT, AS THIS MAY CAUSE HOT WATER TO SPILL AND STEAM TO ESCAPE FROM THE FILLING OPENING; 2. EXTREME CAUTION SHOULD BE EXERCISED WHEN POURING OUT ANY REMAINING WATER FROM THE WATER TANK; 3. STOP FILLING WATER UNTIL IT REACHES THE MAX LINE; 4. TO EXTEND THE LIFE OF THE STEAM WRINKLE REMOVER, IT IS RECOMMENDED TO USE DISTILLED OR DEMINERALIZED WATER. 5. USE ONLY WATER. DO NOT USE DETERGENTS OR OTHER CHEMICAL SUBSTANCES; ---------- CLEANING AND MAINTENANCE ----------- DO NOT IMMERSE THE DEVICE IN WATER. USE A DRY AND CLEAN CLOTH TO DRY THE DEVICE, NO SPECIAL CLEANING AGENT IS REQUIRED. ENSURE THE MAIN BODY IS DRY BEFORE STORAGE OR PACKAGING.
